“Gas Operated”, Honda 5.5HP E.L.Smith model 109FCH05G8W reciprocating/piston PORTABLE air compressor with 8 gal. tank capacity and built-in pressure relief valve. System will generate approx. 6scfm @ 125psi. This system is in great condition and would make an ideal unit for a contractor to “throw in the back of his truck”. Shipping dimensions/weight are: 25Hx40Lx20W/150lbs.

50HP CompAir model 6050 Cyclon rotary screw air compressor. This unit has only 7035 hours of operation time on the hour meter and has been maintained by a licensed CompAir dealer. System operates on 460V with both auto/manual control and will generate approx. 200 cfm @ 120 psi. ACM recommends that this system be used that this system be used in conjunction with a 200 to 400 gal. pressure tank. Contact ACM for shipping weights and measurements.

Gardner Denver model EDE-QJB 50HP rotary screw air compressor with Auto/Dual control and microprocessor touch pad operation panel. This system will generate 221 scfm at 125 psi and operates on 460/480V 3 phase power. This is a base mounted unit with 45,000 hours on the operation meter (less than half of normal full life time) and maintained by licensed Gardner Denver distributor. This would be a great unit for a medium size industrial/commercial company. The shipping dimensions are: 74"Lx44"Wx39"H and weighs 2300 lbs.

Quincy Northwest model F15L 15HP rotary screw air compressor with 120gal. pressure tank. System has air cooled after cooler with condensate separator and electronic programmable condensate drain. System will generate approx. 60cfm of air at approx. 115psi and is wired for 460V 3 phase power. Shipping weight and dimensions: 65Lx39Wx70H, 1200lbs, Contact ACM for shipping quote.

SullAir model RSVS-10, 15HP, 260 acfm at 115 psi vacuum pump. This is a full blown industrial pump with air coolers, demister, new starter motor and covered control panel. The system will operate on both 230/460V 3 phase power. System ships f.o.b. Everett, WA, 98204. ACM can provide discount shipping quotes to all areas of the country. Shipping dimensions are: 55"Lx34"Wx55"H and weight is approx. 725 lbs including base.

100 HP Ingersoll-Rand model SSR EP-100 Rotary Screw air compressor with analog controls and on-line/off-line pressure modulator. Wired for 460V 3 phase with Star Delta reduced start voltage starter. System will generate approx. 445 cfm at 125 psi. Low system hours at 51,143 hours. Shipping weight/dimensions: 3000 lbs., 67Lx64Wx67H.

“water cooled” 40HP rotary screw air compressor. This is a Quincy model QNW-190C-1 generating 160 cfm @ 125 psi. and operates on 460v three phase. Although the system shows just over 80 K hours on the operation meter, the system has been routinely serviced by a licensed distributor and is in excellent condition. This system would be a good value for a light duty cycle requirement but still requiring significant air flow. Contact ACM for shipping information.

25HP Kellog American model 462 TVX two stage piston type air compressor with a 250 gal. pressure tank. This is an older unit but has been well maintained by a licensed dealer. The system is industrial grade, running on 460V 3 phase power and will generate approx. 95cfm at 175 psi. A good low cost unit for a small to medium size company/user or a great backup unit at a reasonable cost. Shipping dimensions/weight: 88.5"x31"x71" 1735 lbs. Contact ACM for shipping quotation.